11.6 Wide Screen Touch Industrial Monitor

Product Overview:

TAICENN TM-DPC116 series is an enhanced stability and reliability industrial 11.6 wide screen touch industrial monitor product. The design uses a multi-point (10- points) projective capacitive touch screen, and it can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.

The 11.6 wide screen touch industrial monitor TM-DPC116 uses full-sealed box construction, and its front panel complaints NEMA / IP65 waterproof and dustproof standard, to prevent installation in the control cabinet because of the scene splashing water droplets and water vapor into the host and thus affect equipment operation; high-strength steel box structure, so that it can adapt to the harsh industrial site work environment, the most suitable for factory automation, machinery manufacturing, CNC equipment, textile equipment, communication networks, power automation and other industrial applications.

FAQ1: Is TM-DPC116 wide screen display panel?

Yes. TAICENN 11.6 wide screen touch industrial monitor TM-DPC116 is wide screen display panel. When monitors are sold, the quoted size is the diagonal measurement of the display area. Because of the different ratio, a 16:9 monitor will have a shorter height than a 4:3 monitor of the same advertised size.

Since computer displays are advertised by their diagonal measure, for monitors with the same display area, a widescreen monitor will have a larger diagonal measure, thus sounding more impressive. Within limits, the amount of information that can be displayed, and the cost of the monitor depend more on area than on diagonal measure. TM-DPC116 use wide screen 1366 x 768 resolution LCD display panel.

FAQ2: What’s means on IP66?

Depending on your project, the differences between these three ratings can be very important. A fixture rated with any of the three of these ratings is equally protected against dust, dirt, sand, and debris (as indicated by the “6” digit). The liquid/water protection for each of these three ratings is unique.

An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets. This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.

TAICENN 11.6 wide screen touch industrial monitor TM-DPC116 specially designed for our customers, but its IP rating is only surface IP65 rating, rather than IP66.

FAQ3: What is a projected capacitive touch?

Projected capacitive touch (PCT) technology is a capacitive technology which allows more accurate and flexible operation, by etching the conductive layer. An X-Y grid is formed either by etching one layer to form a grid pattern of electrodes, or by etching two separate, parallel layers of conductive material with perpendicular lines or tracks to form the grid; comparable to the pixel grid found in many liquid crystal displays (LCD). TAICENN 11.6 wide screen touch industrial monitor has a real good touch performance.

Ordering Information: