TAICENN 12.1 Pcap touch screen panel monitor TM-PC121 model is an enhanced stability and reliability industrial touch monitor product. The design uses a multi-point (10- points) projective capacitive touch screen, and it can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.
The 12.1 Pcap touch screen panel monitor TM-PC121 uses full-sealed box construction, and its front panel complaints NEMA / IP65 waterproof and dustproof standard, to prevent installation in the control cabinet because of the scene splashing water droplets and water vapor into the host and thus affect equipment operation; high-strength steel box structure, so that it can adapt to the harsh industrial site work environment, the most suitable for factory automation, machinery manufacturing, CNC equipment, textile equipment, communication networks, power automation and other industrial applications.
FAQ1: What is The IP65, IP66 and IP67 rating protection?
A fixture with an IP rating of 65 is protected against multi-directional, low-pressure water jets. In order to pass testing and achieve an IP65 rating, fixtures must be able to withstand water projected by a 0.25-inch nozzle. To achieve satisfactory results, this test must be run for a minimum of fifteen minutes, with the water source placed three yards from the fixture. Additionally, the water pressure must be 30 kPa with water volume of 3.3 gallons per minute.
TAICENN small Pcap touch screen panel monitor TM-PC121 model support front IP65 rating protection.
An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets. This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.
A fixture rated at IP67 is protected from water immersion between 5.9 inches and 39.37 inches. To pass IP67 testing, the fixture must not permit ingress of harmful quantities of water when fully immersed. There must be at least 5.9 inches of water above the fixture for the test to be valid.
OSD Button in back panel
306 x 242.5 x 51mm (W*H*D)
295 x 232mm (W*H)
Front Panel: Aluminum-magnesium alloy, anodic treatment
Panel Mounting, VESA 75/100
12.1’’ TFT LCD
1024 * 768 (XGA)
WLED, 30 000 hours
245.76 x 184.32 mm (H x V)
800: 1 (Typ.)
Projective capacitive (P-cap.)
USB (Optional RS232)
Multi-points, Max. up to 10 Points
>100 000 000 times
Power & Environmental
IP65 rating in front panel
50~500Hz,1.5G,0.15mm peak to peak
DC 12V or DC 24V