24 Inch Full HD Industrial Monitor

Model: TM-PC240
24.0-inch wide screen Full HD projective capacitive touch industrial monitor

● 24.0’’ TFT LCD, LED backlit, Resolution 1920*1080;
● projected capacitive touch screen (10-points) touch;
● Aluminum-magnesium alloy, eco-friendly metal treatment;
● Multi DVI+VGA signal input, Panel mounting;
● DC 12V power input, Optional with wide-voltage 9~36V;
● Optional No-touch feature, with tempered glass.
Chat Now

Product Details

Product Overview:

TAICENN TM-PC240 series is our new released big dimension 24 inch Full HD industrial monitor product. The design uses 24.0 inch wide screen full HD 1920 x 1080 resolution, multi-point projective capacitive touch screen, supports multi 1*VGA and 1*DVI signal input, Supports Panel mounting and optional VESA mounting. TAICENN 24 inch full HD industrial monitor TM-PC240 can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.

TAICENN TM-PC240 use aluminum-magnesium alloy, anodic and galvanized, eco-friendly treatment.



FAQ1: Can TAICENN industrial monitor support gloves usage?

Industrial monitor products have become the mainstream of today's electronics, but in the cold winter, people want to be able to wear gloves to operate the touch screen monitor. The limitation of capacitive touch technology can be remedied by this solution and can be used in certain industrial applications. In addition to hand-held devices in winter applications need gloves, some users need to wear gloves throughout the year, so it is necessary to integrate capacitive touch sensors in new products. In general, the design of a particular sensor can be fine-tuned through a large number of tests. The application of gloves may reduce the sensitivity of the sensor. The capacitive touch sensor will not be greatly affected by the use of thin plastic, disposable vinyl gloves. But not all gloves have little effect on capacitive touch sensors. Gloves made of knitted, woven or woolen materials have a lot of air space, so the dielectric constant is very low, which insulates the finger from the sensor electrode. As a result, the response of the touch screen will be affected and become insensitive. In addition, the gloves are very wet, whether there are detergents, plasma compounds, will also have a great impact on capacitive touch sensors, should be considered.

TAICENN provide full sereis PCAP touch monitors with gloves using optional. Our 24 inch full HD industrial monitor providing possibilities to work with gloves.



Basic Parameter                                  


OSD Button in back panel

Overall Dimension

582 x 349.2 x 55mm (W*H*D)

Hole Dimension

573 x 340 mm (W*H)


Front Panel: Aluminum-magnesium alloy, anodic treatment

Back panel: SGCC, Galvanized treatment


Panel Mounting, VESA 75/100

Display port

1*DVI ,1*VGA

New weight

6.5 KG



24.0’’ TFT LCD


1920 * 1080 (Full HD)

Backlit MTBF

WLED, 50 000 hours


250 (cd/m2)

Display area

531.36 x 298.89 mm (H x V)

Contrast ratio

1000: 1 (Typ.)

Viewing angle

85/85/80/80 (Typ.)



Projective capacitive (P-cap.)


USB (Optional RS232)



Touch points

Multi-points, Max. up to 10 Points


>100 000 000 times

Surface hardness

Mohs 6H

Operating force


Special treatment

Anti-fingerprint treatment

Power & Environmental

Working temperature


Storage temperature


Water Proof

IP65 rating in front panel

Relative humidity

10~95%@10℃(No condensation)


50~500Hz,1.5G,0.15mm peak to peak


10G/peak(11ms sec)

Power input

DC 12V or DC 9~36V

Power consumption

Around 30W