12.1 Intel Industrial Touch Panel PC

Product Overview:

TAICENN TPC-PC121C Intel J1900 industrial touch panel pc is a low power-consumption, Fan-less designed, enhanced stability and reliability industrial 12.1-inch Touch Panel PC product. It adapts Intel Baytrail J1900/J1800 processor. TPC-PC121C Intel J1900 industrial touch panel pc storage can support 2.5'' SATA and mSATA interface, HDD or SSD. The design uses a multi-point (10- points) projective capacitive touch screen (Optional with high-temp. five-wires resistive touch, or no touch), and it can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.

The TPC-PC121C Intel J1900 industrial touch panel pc uses full-sealed box construction, and it can prevent dust from entering the device system.

The TAICENN TPC-PC121C Intel J1900 industrial touch panel pc is compatible with Win7, Win8, Win10, Linux, Unix OS, and it also has a good compatibility with customized applications and software programs.

IP65

A fixture with an IP rating of 65 is protected against multi-directional, low-pressure water jets. In order to pass testing and achieve an IP65 rating, fixtures must be able to withstand water projected by a 0.25-inch nozzle. To achieve satisfactory results, this test must be run for a minimum of fifteen minutes, with the water source placed three yards from the fixture. Additionally, the water pressure must be 30 kPa with water volume of 3.3 gallons per minute.

IP66

An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets. This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.

IP67

A fixture rated at IP67 is protected from water immersion between 5.9 inches and 39.37 inches. To pass IP67 testing, the fixture must not permit ingress of harmful quantities of water when fully immersed. There must be at least 5.9 inches of water above the fixture for the test to be valid.