Fanless Box Computer is an industrial computer that is different from traditional industrial computer. It is customized for specific application fields and is developed according to the environmental requirements of temperature and space. It penetrates into various lines with the general demand of intelligent products.
The main features of the fanless Box computer are:
Fully enclosed fanless design, using aluminum block or pure copper block heat dissipation as the heat-dissipating direct contact surface of the CPU, with a layer of thermal conductive silica film on it, the thermal conductive silicone sheet directly contacts the fin with large-area aluminum profile, and directly transfers the heat radiated by the CPU. A large-area aluminum fin is formed to form an efficient heat dissipation method. The advantages brought by the fanless design are undoubtedly silent and dustproof. The traditional industrial computer will accumulate a lot of dust inside with the increase of the use time. At the same time, the long-term operation of the fan bearing will cause problems such as offset and damage, so the use time is long. If you do not pay attention to the IPC that is frequently maintained, it will generate very loud noise, and the internal temperature will be dissipated through the entire alloy chassis. This has the advantage of not only solving the problem of computer cooling, but also the dust-proof and moisture-proof enclosure. The role of the internal components is also well protected.
Low-power, fanless Box PCs typically use low-power platforms. Advanced embedded, low-power motherboards and various external hardware-related interfaces are integrated on the motherboard, thus avoiding the possibility of poor connectivity. Abnormal problems, but also avoid the occurrence of looseness.
The highly integrated, fanless Box computer uses a closed chassis with limited expansion functions, but its reserved interface is relatively rich, usually reserved for high-definition display interfaces, such as VGA, DVI, HDMI, Displayport, etc., also reserved 2 ~12 USB ports and 2~12 serial ports, 2-4 network ports, etc., suitable for various working environments.
The small body, cleverly integrates the main components of the computer into the chassis, takes up less space, is simple and flexible to install and maintain, and is easy to operate, and can be used with almost any terminal, equipment or control cabinet.
Various mounting methods, rail mounting, wall mounting, and desktop mounting.
The development of fanless Box computer has been rapid, and has replaced traditional industrial computer products in many fields. However, embedded Box computer can not completely replace traditional industrial computer. Traditional industrial computer is still superior to fanless Box computer in performance and expansion, but The new round of huge intelligent equipment demand in the automotive, communications, information appliances, medical, military and other industries has driven the development of fanless Box computers and their systems. The future development of the market is very optimistic.